Axzez Forum

100 Mbit/second is maybe okay for older hardware, but our data center control networks have b een 10 Gbps or more for years. Even for the targeted applications in which we want to use PoE, our minimum is 1 Gbps. Any chance for a product upgrade to higher PoE network speeds?

The PDF on the main page for the PoE board seems to give the carrier board flyer. Is there a specific flyer for the multi-PoE board?

I'm currently running the omv-interceptor image from 4/24/24 and I'm not able to see any of my sata drives. I have had the same issues with other images like rpi os lite 64bit+omv7 and desktop-interceptor. I have three drives attached. 2 HDDs and 1 SSD (brand new) and none of them are showing up i

We’re excited to announce the launch of our Legacy Downloads page, where you can find older OS and software releases. While it’s still a work in progress, there’s already a significant amount of content available. We plan to include release notes, which will be compiled from git commit history. Add

I'm using the latest desktop OS image, and it does't appear kernel has support baked in for various multiple table options. Is there a reason it is disabled, and can this been included in future images? root@interceptor:/# zcat /proc/config.gz | grep MULTIPLE_TABLE

If anyone is interested, we have our first test image for OpenMediaVault 7 Sandworm on Debian Bookworm available for anyone to test. This is very close to the final deliverable, if not exactly. This update includes: 1. Update from Debian Bullseye to Bookworm 2. OMV 6 to OMV 7 Sandworm 3. Linux Ker

OFFICIAL images now available on https://www.axzez.com/software-downloads Previous message: We realize that some customers are very interested in the next OS versions that include fixes for Docker, K3S, secure apt sources, missing iptables, software RAID, mixup with Desktop and OMV images, and miss

Noticed this on my fresh install from today's version of Axzez OMV. /etc/apt/sources.list uses `deb http://ftp.us.debian.org/debian bullseye main contrib non-free non-free-firmware` , which • doesn't have certificate checks to ensure the source (it's insecure) • is specific to the US. Much bet

I have a CM4008032. I installed the operating system from windows using Balena Etcher, getting unexpected error45. I then reflashed the operating system using Raspberry PI Imager from windows, then I tried the Raspberry Pi Imager from Debian using your current version 23.01.26.42. Each time I have g

I have an interceptor board with a Lite CM4 module booting the OMV Interceptor Raspberry Pi CM4 OS Image. It boots up fine I can login from the console fine as well as the OMV Workbench with the same login and password I can not however login to SSH with putty. Putty connects but gives me an access

Hey there - I finally got my parts together and flashed the latest axzez OMV image to a USB stick, plugged it into my PSU and... no HDMI output on either port. I saw the RJ45 lights blinking on the WAN port though, so I checked my DHCP server, and... sure enough, it had an IP address. OpenMediaVault

I installed OMV Interceptor, v23.10.09 for my Raspberry Pi CM4 board, did the suggested OMV updates, created 2 users and 2 shared folders. Following videos like: https://www.youtube.com/watch?v=Y3yF1Rsu7ow&t=544s and https://youtu.be/bsrsBFSgT94 things look correct, however I cannot access the

First, I want to say thank you to the team for providing OpenWrt and OMV images. That being said, I'm having issues with getting OpenWrt to work. I have configured port 0 to be wan and bridged ports 1-3 and configured those for lan with a static ip and dhcp. My computer will get an IP address ass

Can the interceptor Board be configured as VPN ROuter with OpenVPN or any other simialr Open Source softwares. If yes, please share the instructions at a high level and will be more than happy to field test it for you.

I have tried the desktop image, and the OMV image, and neither will get docker to start. something is broken. I attempted to install Rapberry pi os - lite, and that was installed, and CasaOS was installed with it, but was flaky and would lock up after a few hours, looking like the ethernet dropped

Software Q. How do I monitor/reset the PoE ports? A. Use the "PoE Ports" tab of the "System Settings" utility in the Axzez provided Wayfire, 3D Wayland Compositor. Q. How do I read the PoE controller status? A. $ cat /proc/pse1/status voltage: 47437 (40000-60000) mV current: 40 (2500) mA power all

Hi all, are we able to boot through the Interceptor 2.0's SD Card? Has anyone made this happen? I'm running a 'Lite' CM4 with no internal storage and wondered if I could use it now we have an SD slot, but initial boots show the SD card as either "Not Found" or similar. Any tips, tricks or setti

I imaged a USB drive with the server image for the CM4. I chose the install option, set the password and rebooted the device. Whenever it tries to boot off of the mmc block device the unit fails with the following error: /bin/sh: 0: can't access tty; job control turned off It does provide a prompt

Is there any chance that we diligennt users could get a Github workflow with at least the standard build? It would just be a lot easier to pull/fork an existing and functioning build that works than spend days cobbling something together from another distro and trying to slap in the kernel patches,

I am wondering if it is possible to upgrade from bullseye to bookworm. Is there anyone who has done this? Thanks.

I've spent weeks trying to get to the bottom of this issue and I cannot figure it out. My interceptor board seems to reach some state where the realtek-smi driver throws some sort of error and then disconnects my interceptor from the network. After plenty of digging, I cannot figure out what is caus

using the 23.09.22-913 image for either desktop or OMV docker errors persist. I reported this over a year ago. It is the images something is broken in them if I use Raspberry pi os, ubuntu, or even native OMV everything works fine...from the USB stick, and I can not use the SATA drives as the opera

So I installed the Interceptor OS on to the eMMC from the Live USB of it, but now it seems to default boot into the eMMC with no chance to boot from another usb. Is there way to change the boot order to usbboot first before going to the eMMC? Ultimately I want to format and clear the OS off of the e

I'm noticing a few issues with the current images: 1. The "Desktop Interceptor Raspberry Pi CM4 OS Image" released 23.10.09 appears to also be an OMV version 2. Both the Desktop and the "OMV Interceptor Raspberry Pi CM4 OS Image" are built with NFS support, but don't include the kernel module (Rel

Ive tried several times to image a 32gb USB drive with the Interceptor CM4 OMV image, but the OS never seems to boot and I am caught in the boot screen. Ive used balenaEtcher and Raspberry Pi Imager with the same results. However, when I take the same USB and image it with the Official Raspberry Pi

I've installed the desktop image from Axzez onto the eMMC of my CM4. The system boots, but the the screen goes blank. I think this is when the video changes resolution. I have HDMI0 connected to a 27" AOC monitor.

Where can I download the swconfig? It isn't in the download section.

I've downloaded your most recent OMV image and I can't login on the console using root or admin with the openmediavault password. Ditto for the web interface with user "admin" and passwd "openmediavault". I've flashed the emmc on 2 different CM4 modules with the image using the latest rpiboot and rp

Now that the new 'bookworm' release of Raspberry Pi OS is released, I'm wondering if anyone has tested it on the Interceptor board. Any issues we should expect?

I have two boards each with a new CM4 Rpi with OMV6 and 2 WD Red 10TB hard drives. Trying to use it as a secondary backup for my small NAS. The data set I need to put on it is less than 4TB. I am running wired ethernet. OMV says the drives are in good order. I am mapping the drive onto a Windows ma